Disassembly

DISASSEMBLY





1. Remove tube connector and tube from control valve lower body.








2. Disassemble upper, inter and lower bodies.





a. Remove bolts (a), (b) and (f) and remove oil strainer from control valve assembly.





b. Remove OD cancel solenoid valve and torque converter clutch solenoid valve from control valve assembly.





c. Remove O-rings from OD cancel solenoid valve, torque converter clutch solenoid valve and harness terminal body.





d. Place upper body facedown, and remove bolts (b), (c) and (f).





e. Remove inter body from lower body.





f. Turn over lower body, and remove accumulator support plate.





g. Remove separating plate and separating gasket from lower body.
h. Remove steel balls and relief valve springs from lower body.
- Be careful not to lose steel balls and relief valve springs.





i. Remove inter body with separating plate and separating gasket from upper body.





j. Check to see that steel balls are properly positioned in inter body and then remove them from inter body.
- Be careful not to lose steel balls.





k. Check to see that steel balls are properly positioned in upper body and then remove them from upper body.
- Be careful not to lose steel balls.