Disassembly

DISASSEMBLY





1. Check operation of reverse clutch
a. Install seal ring onto drum support of oil pump cover and install reverse clutch assembly. Apply compressed air to oil hole.
b. Check to see that retaining plate moves to snap ring.
c. If retaining plate does not move to snap ring, D-ring or oil seal may be damaged or fluid may be leaking at piston check ball.





2. Remove snap ring.
3. Remove drive plates, driven plates, retaining plate, and dish plates.





4. Set Tool on spring retainer and remove snap ring from reverse clutch drum while compressing return springs.
- Set Tool directly above springs.
- Do not expand snap ring excessively.

5. Remove spring retainer and return springs.





- Do not remove return springs from spring retainer.





6. Remove piston from reverse clutch drum by turning it.





7. Remove D-ring and oil seal from piston.