With CONSULT

OVERALL FUNCTION CHECK
This procedure can be used for checking the overall function of the throttle position sensor. During this check, a Diagnostic Trouble Code (DTC) might not be confirmed.
1) Turn ignition switch "ON".




2) Select "MANU TRIG" and "HI SPEED" in "DATA MONITOR" mode with CONSULT.
3) Select "THRTL POS SEN" and "ABSOL TH/PS" in "DATA MONITOR" mode with CONSULT.
4) Press RECORD on CONSULT SCREEN at the same time accelerator pedal is depressed.




5) Print out the recorded data and make sure the followings:
^ The voltage when accelerator pedal fully released is approximately 0.35-0.65 volts.
^ The voltage rise is linear in response to accelerator pedal depression.
^ The voltage when accelerator pedal fully depressed is approximately 4 volts.