With CONSULT

HOW TO CLEAR DIAGNOSTIC TROUBLE CODES (WITH CONSULT)
1. If the ignition switch stays ON" after repair work, be sure to turn ignition switch "OFF" once. Wait for at least 3 seconds and then turn it "ON" again.
2. Turn CONSULT "ON", and touch "A/T".
3. Touch "SELF-DIAG RESULTS".
4. Touch "ERASE". (The Diagnostic Trouble Codes (DTC) in the A/T control unit will be erased.)
5. Touch "ENGINE".
6. Touch "SELF-DIAG RESULTS".
7. Touch "ERASE". (The DTC in the Engine Control Module (ECM) will be erased.)