Without CONSULT
DIAGNOSTIC TROUBLE CODE DETECTING CONDITION
1. Turn ignition switch "ON" and wait for at least 2 seconds.
2. Perform "Diagnostic Test Mode II (Self-diagnostic results)" with Engine Control Module (ECM).
For the above malfunction b)
1. Start engine and warm it up sufficiently.
2. Turn ignition switch "OFF" and wait for at least 3 seconds.
3. Start engine again and run it for at least 30 seconds at idle speed.
4. Turn ignition switch "OFF", wait for at least 3 seconds and then "ON".
5. Perform "Diagnostic Test Mode II (Self-diagnostic results)" with ECM.