Cruise Control: Adjustments

ASCD Wire Adjustment:

CAUTION:
^ Be careful not to twist Automatic Speed Control Device (ASCD) wire when removing it.
^ Do not tense ASCD wire excessively during adjustment. Adjust the tension of ASCD wire in the following manner.
1. Loosen lock nut and adjusting nut.
2. Make sure that accelerator wire is properly adjusted.
3. Tighten adjusting nut just until throttle drum starts to move.
4. Loosen adjusting nut again 1/2 to 1 turn.
5. Tighten lock nut.