Illumination

Illumination-System Description:

Power is supplied at all times
^ through 10 A fuse (No. (4) ,located in the fuse block)
^ to lighting switch terminal (11).
The lighting switch must be in the 1ST or 2ND position for illumination.
The illumination control switch that controls the amount of current to the illumination system. As the amount of current increases, the illumination becomes brighter.
The following chart shows the power and ground connector terminals for the components included in the illumination system.
The ground for all of the components are controlled through terminals (2) and (3) of the illumination control switch and body ground (M5).