With CONSULT

OVERALL FUNCTION CHECK
Instead of performing the DTC DETECTING CONDITION, the following method can be used for checking the function of the vehicle speed sensor. (However, the Diagnostic Trouble Code (DTC) detection cannot be confirmed.)
1. Jack up drive wheels.
2. Start engine.




3. Perform "VEHICLE SPEED SEN CIRCUIT" in "FUNCTION TEST" mode with CONSULT.

OR

2. Start engine.




3. Read vehicle speed sensor signal in "DATA MONITOR" mode with CONSULT.

NOTE: The vehicle speed on CONSULT should be able to exceed 10 km/h (6 MPH) when rotating wheels with suitable gear position.