With Consult

DIAGNOSTIC TROUBLE CODE DETECTING CONDITION (OVERALL)
1. Start engine and warm it up sufficiently.
2. Turn ignition switch "OFF" and wait for at least 3 seconds.




3. Turn ignition switch "ON" and select "SELF-LEARN CONTROL" in "ACTIVE TEST" mode with CONSULT.
4. Clear the self-learning control coefficient by touching "CLEAR".
5. Start engine again and wait for at least 10 minutes at idle speed. The DTC should be detected at this stage, if a malfunction exists.
6. If it is difficult to start engine at step 5, the fuel injection system has a malfunction, too.