Without Scan Tool

SELF-DIAGNOSIS USING THE WARNING LAMP





Self-diagnosis results can be also read by using the "AIR BAG" warning lamp for SRS system.
The "Air bag" warning lamp operates as shown below:

WARNING: When the "AIR BAG" warning lamp 19 flashing, compare the flash time to the chart below.





HOW TO ALTERNATE SELF-DIAGNOSIS

Problem codes are displayed in present diagnosis mode (self-diagnosis results).





WARNING LAMP INDICATION

After the malfunctioning parts have been repaired, return the system to the user mode.
This will clear the present diagnosis mode information displayed as self-diagnosis results.
- After repairing malfunctioning part, attempt to clear self-diagnosis results from memory.
- If a malfunctioning part is not completely repaired, Information stored in memory will not be cleared.





Self-diagnosis results in present mode can be identified by number of flashes (d). Refer to Table below for troubled parts.





WARNING LAMP FLASHING TIMES AND REPAIR