Without CONSULT

*: Using CONSULT, "P0130" Will Be Displayed In This Case.:

OVERALL FUNCTION CHECK
1) Start engine and warm it up sufficiently.
2) Make sure that malfunction indicator lamp goes on and off periodically more than 5 times for 10 seconds while keeping at 2,000 rpm in Diagnostic Test Mode II.


Diagnostic Procedure
For Right Bank:
Refer to DTC P0130 Front Heated Oxygen Sensor (Right Bank) Circuit
Refer to DTC P0135 Frt Heated Oxygen Sensor's Heater (Rt Bank) Circuit
For Left Bank:
Refer to DTC P0150 Front Heated Oxygen Sensor (Left Bank) Circuit
Refer to DTC P0155 Frt Heated Oxygen Sensor's Heater (Lt Bank) Circuit