Fuel Delivery and Air Induction: Adjustments

CAUTION:
^ When removing accelerator wire, make a mark to indicate lock nut's initial position.
^ Check that throttle valve opens fully when accelerator pedal is fully depressed and that it returns to Idle position when pedal is released.
^ Check accelerator control parts for improper contact with any adjacent parts.
^ When connecting accelerator wire, be careful not to twist or scratch its inner wire.
^ Refer to "ASCD WIRE ADJUSTMENT" for ASCD wire adjustment.

ADJUSTING ACCELERATOR WIRE
1. Loosen lock nut, and tighten adjusting nut until throttle drum starts to move.




2. From that position turn back adjusting nut 1.5 to 2 turns, and fasten it with lock nut.