With CONSULT

HOW TO ERASE DIAGNOSTIC TROUBLE CODE (WITH CONSULT)
1. If the ignition switch stays "ON" after repair work, be sure to turn ignition switch "OFF" once. Wait for at least 3 seconds and then turn it "ON" again.
2. Turn CONSULT "ON", and touch "A/T".
3. Touch "SELF-DIAG RESULTS".
4. Touch "ERASE". (The Diagnostic Trouble Code (DTC) in the A/T control unit will be erased.)
5. Touch "ENGINE".
6. Touch "SELF-DIAG RESULTS".
7. Touch "ERASE". (The DTC in the Engine Control Module (ECM) will be erased.)