With CONSULT

DIAGNOSTIC TROUBLE CODE CONFIRMATION PROCEDURE




For The Malfunction a)
1. Turn ignition switch "ON" and select "DATA MONITOR" mode with CONSULT




2. Confirm that the engine coolant temperature is lower than 50°C (122°F). (If necessary, wait until the engine coolant temperature is the same as atmosphere temperature.)
3. Start engine and run it for at least 8 seconds at idle speed. [With the engine coolant temperature lower than 50°C (122°F)].

For The Malfunction b)
1. Start engine and warm it up sufficiently.
2. Turn ignition switch "OFF", wait for at least 3 seconds and then start engine again.
3. Select "DATA MONITOR" mode with CONSULT.
4. Run the engine for at least 8 seconds at idle speed.