With CONSULT

OVERALL FUNCTION CHECK
This procedure can be used for checking the overall function of the throttle position sensor. During this check, a DTC might not be confirmed.
1. Turn ignition switch "ON".




2. Select "MAN U TRIG" and "HI SPEED" in "DATA MONITOR" mode with CONSULT.
3. Select "THRTL POS SEN" and "ABSOL TH-PS" in "DATA MONITOR" mode with CONSULT.
4. Press RECORD on CONSULT SCREEN at the same time accelerator pedal is depressed.




5. Print out the recorded data and make sure the followings:
^ The voltage when accelerator pedal fully released is approximately 0.35-0.65 volts.
^ The voltage rise is linear in response to accelerator pedal depression.
^ The voltage when accelerator pedal fully depressed is approximately 4 volts.