Description

Operation Flow:

1. Operation Flow

2. Setting the theft warning System

Initial condition
1. Close all doors.
2. Close hood and trunk lid.
3. Pull key out of ignition.

Disarmed phase
The theft warning system is in the disarmed phase when any door(s), hood or trunk lid is opened. The security indicator lamp blinks every second.

Pre-armed phase and armed phase
The theft warning system turns into the "pre-armed" phase when hood, trunk lid and all doors are closed and locked by key or multi-remote control. (The security indicator lamp illuminates.)
After about 30 seconds, the system automatically shifts into the "armed" phase (the system is set). (The security indicator lamp blinks every 2.4 seconds.)

3. Canceling the set theft warning system
When the following (a) or (b) operation is performed, the armed phase is canceled.
a. Unlock the doors or the trunk lid with the key.
b. Unlock the doors or the trunk lid with the multi-remote controller.

4. Activating the alarm operation of the theft warning system
Make sure the system is in the armed phase. (The security indicator lamp blinks every 2.4 seconds.) When any of the following operations (a), (b) and (c) is performed, the system sounds the horns and flashes the head lamps for about 2.5 minutes. (At the same time, the system disconnects the starting system circuit.) The starting system is kept dead even after the alarm turns off.
a. Engine hood is opened without using the hood opener.
b. Door is unlocked or trunk lid is opened without using key or multi remote controller.
c. Key cylinder is pulled out from either front door or the trunk lid.