Service Specifications

DIMENSIONS
Cylinder Bore
Standard Inner Diameter
Grade 1 89.000 - 89.010 mm (3.5039 - 3.5043 inch)
Grade 2 89.010 - 89.020 mm (3.5043 - 3.5047 inch)
Grade 3 89.020 - 89.030 mm (3.5047 - 3.5051 inch)
Limit 0.2 mm (0.008 inch)
Distortion
Standard Less Than 0.03 mm (0.0012 inch)
Limit 0.1 mm (0.004 inch)
Inner Diameter [1] Less Than 0.03 mm (0.0012 inch)
Nominal Height [3]
Standard 246.95 - 247.05 mm (9.7224 - 9.7264 inch)
Limit [2] 0.2 mm (0.008 inch)
Out-Of-Round Less Than 0.015 mm (0.0006 inch)
Taper Less Than 0.010 mm (0.0004 inch)


NOTE:
[1]: Difference in inner diameter between cylinders.
[2]: Total amount of cylinder head resurfacing plus cylinder block resurfacing.
[3]: Measured from crankshaft centerline.