Self-Diagnostic Procedure With CONSULT

DLC For CONSULT:

SELF-DIAGNOSTIC PROCEDURE (With CONSULT)



1. Turn on CONSULT and touch "A/T".
If A/T is not displayed, check A/T control unit power supply and ground circuit. If result is NG, refer to the vehicle "Power Supply Routing" wiring diagram.




2. Touch "SELF-DIAG RESULTS".
Display shows malfunction experienced since the last erasing operation.
CONSULT performs REAL-TIME SELF-DIAGNOSIS. Also, any malfunction detected while in this mode will be displayed at real time.








X: Applicable
-: Not Applicable
*1: These malfunctions cannot be displayed by the MIL if another malfunction is assigned to the OD OFF indicator.