Self-Diagnostic Procedure With Generic Scan Tool

DLC For GST:

SELF-DIAGNOSTIC PROCEDURE [With Generic Scan Tool (GST)]

1. Turn off ignition switch.

DLC For GST:

2. Connect Generic Scan Tool (GST) to data link connector for GST.
[Data link connector for GST is located under LH dash panel, near fuse box cover.]




3. Turn ON ignition switch.
4. Enter the program according to instruction on the screen or in the operation manual.
(*: Regarding GST screens, sample screens are shown.)




5. Perform each diagnostic mode according to each service procedure.

For further information, see the GST Operation Manual of the tool maker.


FUNCTION