Crankshaft, Engine

DIMENSIONS
Center Distance "r": 47.95 - 48.05 mm (1.8878 - 1.8917 inch)

Fillet Roll: More Than 0.1 mm (0.004 inch)

Free End Play:
Standard: 0.05 - 0.18 mm (0.0020 - 0.0071 inch)
Limit: 0.3 mm (0.012 inch)

Main Journal Diameter "Dm":
Grade No. 0: 59.967 - 59.975 mm (2.3609 - 2.3612 inch)
Grade No. 1: 59.959 - 59.967 mm (2.3606 - 2.3609 inch)
Grade No. 2: 59.951 - 59.959 mm (2.3603 - 2.3606 inch)

Out-Of-Round (X - Y): Less Than 0.005 mm (0.0002 inch)

Pin Journal "Dp":
Grade No. 0: 49.968 - 49.974 mm (1.9672 - 1.9675 inch)
Grade No. 1: 49.962 - 49.968 mm (1.9670 - 1.9672 inch)
Grade No. 2: 49.956 - 49.962 mm (1.9668 - 1.9670 inch)

Runout (TIR):[1] Less Than 0.04 mm (0.0016 inch)

Taper (A - B): Less Than 0.002 mm (0.0001 inch)

[1]Total Indicator Reading