Spot Lamp Control By Time Control Unit

Power is supplied at all times
^ to room lamp relay terminal (1)
^ through 1O A fuse [No. (39) located in the fuse block (in relay box)]
^ to interior lamp terminal (3),
^ to spot lamp terminal (2) (Except convertible models) or (3) (Convertible models),
^ to luggage room lamp terminal (1),
^ to trunk room lamp terminal (1), and
^ to each toot lamp terminal (1).

Switch operation
With the spot lamp switch in the ON position, ground is supplied
^ to spot lamp terminal (2) (Convertible models) or (1) (Except convertible models)
^ through body grounds (M3) and (M90) (Convertible models) or (B7) and (B32) (Except convertible models). With power and ground supplied, the spot lamp turns ON.

Spot lamp control by time control unit (Only for convertible models)
Time control unit receives a signal when door switch LH is opened and closed to turn spot lamp ON, then fades it out. Ground is supplied
^ to spot lamp terminal (1)
^ through time control unit terminal (20)
^ to time control unit terminal (15)
^ through body grounds (M3) and (M90).
With power and ground supplied, the spot lamp turns ON. After door switch is closed, spot lamp illuminates at about half brightness, then fades out.