Self Diagnostic Mode

ENGINE RELATED ITEMS




Diagnostic Trouble Code (DTC) Chart

Abbreviations for Quick Reference of "DTC CONFIRMATION PROCEDURE"
IGN: ON :
Turning the ignition switch ON is required for checking the function of the sensor, switch, solenoid and circuit.
RUNNING :
Running engine is required for checking the function of the sensor, switch, solenoid and circuit.
LIFTING :
Lifting up the vehicle, running engine and spinning wheels are required.
DRIVING :
Driving the vehicle in the specified pattern is required.

Abbreviations for Quick Reference of "OVERALL FUNCTION CHECK"
IGN: ON :
Turning the ignition switch ON is required for the ECM to detect a malfunction (if one exists).
RUNNING :
Running engine is required for the ECM to detect a malfunction (if one exists).
LIFTING :
Lifting up the vehicle, running engine and spinning wheels are required for the ECM to detect a malfunction (if one exists).
DRIVING :
Driving the vehicle in the specified pattern is required for the ECM to detect a malfunction (if one exists).





ENGINE RELATED ITEMS
Abbreviations for Quick Reference of "DTC CONFIRMATION PROCEDURE"
IGN: ON :
Turning the ignition switch ON is required for checking the function of the sensor, switch, solenoid and circuit.
RUNNING :
Running engine is required for checking the function of the sensor, switch, solenoid and circuit.
LIFTING :
Lifting up the vehicle, running engine and spinning wheels are required.
DRIVING :
Driving the vehicle in the specified pattern is required.

Abbreviations for Quick Reference of "OVERALL FUNCTION CHECK"
IGN: ON :
Turning the ignition switch ON is required for the ECM to detect a malfunction (if one exists).
RUNNING :
Running engine is required for the ECM to detect a malfunction (if one exists).
LIFTING :
Lifting up the vehicle, running engine and spinning wheels are required for the ECM to detect a malfunction (if one exists).
DRIVING :
Driving the vehicle in the specified pattern is required for the ECM to detect a malfunction (if one exists).

*3: Using CONSULT, 'P0130" will be displayed.








Abbreviations for Quick Reference of "DTC CONFIRMATION PROCEDURE"
IGN: ON :
Turning the ignition switch ON is required for checking the function of the sensor, switch, solenoid and circuit.
RUNNING :
Running engine is required for checking the function of the sensor, switch, solenoid and circuit.
LIFTING :
Lifting up the vehicle, running engine and spinning wheels are required.
DRIVING :
Driving the vehicle in the specified pattern is required.

Abbreviations for Quick Reference of "OVERALL FUNCTION CHECK"
IGN: ON :
Turning the ignition switch ON is required for the ECM to detect a malfunction (if one exists).
RUNNING :
Running engine is required for the ECM to detect a malfunction (if one exists).
LIFTING :
Lifting up the vehicle, running engine and spinning wheels are required for the ECM to detect a malfunction (if one exists).
DRIVING :
Driving the vehicle in the specified pattern is required for the ECM to detect a malfunction (if one exists).








ENGINE RELATED ITEMS
Abbreviations for Quick Reference of "DTC CONFIRMATION PROCEDURE"
IGN: ON :
Turning the ignition switch ON is required for checking the function of the sensor, switch, solenoid and circuit.
RUNNING :
Running engine is required for checking the function of the sensor, switch, solenoid and circuit.
LIFTING :
Lifting up the vehicle, running engine and spinning wheels are required.
DRIVING :
Driving the vehicle in the specified pattern is required.

Abbreviations for Quick Reference of "OVERALL FUNCTION CHECK"
IGN: ON :
Turning the ignition switch ON is required for the ECM to detect a malfunction (if one exists).
RUNNING :
Running engine is required for the ECM to detect a malfunction (if one exists).
LIFTING :
Lifting up the vehicle, running engine and spinning wheels are required for the ECM to detect a malfunction (if one exists).
DRIVING :
Driving the vehicle in the specified pattern is required for the ECM to detect a malfunction (if one exists).








Abbreviations for Quick Reference of "DTC CONFIRMATION PROCEDURE"
IGN: ON :
Turning the ignition switch ON is required for checking the function of the sensor, switch, solenoid and circuit.
RUNNING :
Running engine is required for checking the function of the sensor, switch, solenoid and circuit.
LIFTING :
Lifting up the vehicle, running engine and spinning wheels are required.
DRIVING :
Driving the vehicle in the specified pattern is required.

Abbreviations for Quick Reference of "OVERALL FUNCTION CHECK"
IGN: ON :
Turning the ignition switch ON is required for the ECM to detect a malfunction (if one exists).
RUNNING :
Running engine is required for the ECM to detect a malfunction (if one exists).
LIFTING :
Lifting up the vehicle, running engine and spinning wheels are required for the ECM to detect a malfunction (if one exists).
DRIVING :
Driving the vehicle in the specified pattern is required for the ECM to detect a malfunction (if one exists).

*5 In case of this diagnostic item, the freeze frame data will not be stored in ECM.
This diagnosis does not have the 2 trip detection logic, and will not light up the MIL.








Abbreviations for Quick Reference of "DTC CONFIRMATION PROCEDURE"
IGN: ON :
Turning the ignition switch ON is required for checking the function of the sensor, switch, solenoid and circuit.
RUNNING :
Running engine is required for checking the function of the sensor, switch, solenoid and circuit.
LIFTING :
Lifting up the vehicle, running engine and spinning wheels are required.
DRIVING :
Driving the vehicle in the specified pattern is required.

Abbreviations for Quick Reference of "OVERALL FUNCTION CHECK"
IGN: ON :
Turning the ignition switch ON is required for the ECM to detect a malfunction (if one exists).
RUNNING :
Running engine is required for the ECM to detect a malfunction (if one exists).
LIFTING :
Lifting up the vehicle, running engine and spinning wheels are required for the ECM to detect a malfunction (if one exists).
DRIVING :
Driving the vehicle in the specified pattern is required for the ECM to detect a malfunction (if one exists).








A/T RELATED ITEMS (Be sure to erase the DTC stored in ECM after the A/T related repair.)








INSPECTION PRIORITY
If some DTCs are displayed at the same time, perform inspections one by one based on the following priority chart.