Operation CHARM: Car repair manuals for everyone.

DTC P0340 (0101) Thru P0705 (1003)




ENGINE RELATED ITEMS

NOTE:
- A dead (weak) battery will reduce the accuracy to the on-board diagnosis and may cause the MIL to light up without any malfunctions.

Abbreviations for Quick Reference of "DTC CONFIRMATION PROCEDURE"
IGN:ON:
Turning the ignition switch ON is required for checking the function of the sensor, switch, solenoid and circuit.
RUNNING:
Running engine is required for checking the function of the sensor, switch, solenoid and circuit.
LIFTING:
Lifting up the vehicle, running engine and spinning wheels are required.
DRIVING:
Driving the vehicle in the specified pattern is required.

Abbreviations for Quick Reference of 'OVERALL FUNCTION CHECK"
IGN: ON:
Turning the ignition switch ON is required for the ECM to detect a malfunction (if one exists).
RUNNING:
Running engine is required for the ECM to detect a malfunction (if one exists).
LIFTING:
Lifting up the vehicle, running engine and spinning wheels are required for the ECM to detect a malfunction (if one exists).
DRIVING:
Driving the vehicle in the specified pattern is required for the ECM to detect a malfunction (if one exists).
*7: For details, refer to each DTC Confirmation Procedure.




*1: This is Quick Reference of "DTC CONFIRMATION PROCEDURE".
Details are described in each TROUBLE DIAGNOSIS FOR DTC XXXXX.
*2: The "OVERALL FUNCTION CHECK" is a simplified and effective way to inspect a component or circuit.
In some cases, the "OVERALL FUNCTION CHECK" is used rather than a "DIAGNOSTIC TROUBLE CODE CONFIRMATION PROCEDURE".
When no DTC CONFIRMATION PROCEDURE is available, the "NG" result of the OVERALL FUNCTION CHECK can be considered to mean the same as a DTC detection.
- During an "NG" OVERALL FUNCTION CHECK, the DTC might not be confirmed.
- This is Quick Reference of "OVERALL FUNCTION CHECK".
Details are described in each TROUBLE DIAGNOSIS FOR DTC XXXXX.
*6: Warm-up three way catalyst (California models)
Three way catalyst (Non-California models)