DTC 0301

DESCRIPTION
The ECM consists of a microcomputer, diagnostic test mode selector, and connectors for signal input and output and for power supply. The unit controls the engine.




DIAGNOSTIC TROUBLE CODE CONFIRMATION PROCEDURE
WITH CONSULT
1. Turn ignition switch "ON".
2. Select "DATA MONITOR" mode with CONSULT.
3. Start engine.
4. Run engine for at least 30 seconds at idle speed.

OR

WITH GST
1. Turn ignition switch "ON".
2. Select "Mode 3" with GST.
3. Start engine.
4. Run engine for at least 30 seconds at idle speed.

OR

WITH NO TOOLS
1. Turn ignition switch "ON".
2. Start engine and wait at least 30 seconds.
3. Turn ignition switch "OFF" and wait at least 5 seconds.
4. Perform "Diagnostic Test Mode II (Self-diagnostic results)" with ECM.







DIAGNOSTIC PROCEDURE