P1760

Description



The overrun clutch solenoid valve is activated by the A/T control unit in response to signals sent from the inhibitor switch, CD switch, vehicle speed and throttle position sensors. The overrun clutch operation will then be controlled.

Diagnostic Trouble Code (DTC) Confirmation Procedure
After the repair, perform the following procedure to confirm that the malfunction is eliminated.




With Consult
1. Start engine.
2. Select "SELF-DIAG RESULTS" mode with CONSULT.
3. Drive vehicle under the following conditions:
Selector lever in D, CD control switch in "OFF" position and vehicle speed higher than 10 KPH (6 MPH).

OR




With Generic Scan Tool
1. Start engine.
2. Drive vehicle under the following conditions:
Selector lever in D, CD control switch in "OFF" position and vehicle speed higher than 10 KPH (6 MPH).
3. Select "MODE 3" with GST.

OR




Without Tools
1. Start engine.
2. Drive vehicle under the following conditions:
Selector lever in D, CD control switch in "OFF" position and vehicle speed higher than 10 KPH (6 MPH).
3. Perform self-diagnosis.
Refer to Self-Diagnostic Procedure Without Scan Tool.
Self-Diagnostic Procedure Without Scan Tool