Operation

Operation Flow:

1. Operation flow
2. Setting the theft warning system
Initial condition
1. Close all doors.
2. Close hood and trunk lid.
Disarmed phase
The theft warning system is in the disarmed phase when any door(s), hood or trunk lid is opened. The security indicator lamp blinks every second.
Pre-armed phase and armed phase
The theft warning system turns into the "pre-armed" phase when hood, trunk lid and all doors are closed and locked by key or multi-remote controller. (The security indicator lamp illuminates.)
After about 30 seconds, the system automatically shifts into the "armed" phase (the system is set). (The security indicator lamp blinks every 2.4 seconds.)

3. Cancelling the set theft warning system
When the following (a) or (b) operation is performed, the armed phase is canceled.
a. Unlock the doors with the key or multi-remote controller.
b. Open the trunk lid with the key or multi-remote controller. When the trunk lid is closed after opening the trunk lid with the key, the system returns to the armed phase.

4. Activating the alarm operation of the theft warning system
Make sure the system is in the armed phase. (The security indicator lamp blinks every 2.4 seconds.) When the following operation (a) or (b) is performed, the system sounds the horns and flashes the headlamps for about 2.5 minutes. (At the same time, the system disconnects the starting system circuit.)
a. Engine hood, trunk lid or any door is opened before unlocking door with key or multi remote controller.
b. Door is unlocked without using key or multi remote controller.