Manual

Control Panel Operation:

FAN CONTROL SWITCH
This switch turns the fan ON and OFF, and controls fan speed.

MODE SWITCHES
These switches allow control of the air discharge outlets.
When the MODE switch is moved to "DEF" or "F/D" ,the push control amplifier sets the intake door to "FRESH". The compressor turns on when the MODE switch is moved to "DEF".

TEMPERATURE CONTROL LEVER
This lever allows you to adjust the temperature of the discharge air.

RECIRC SWITCH
OFF position: Outside air is drawn into the passenger compartment.
ON position: Interior air is recirculated inside the vehicle.
RECIRC is canceled when DEF or F/D is selected. RECIRC resumes when another mode is chosen.

For California models, intake door is set at RECIRC position automatically when the following conditions are met.

^ The A/C switch is pushed to turn ON with the engine running.
^ The temperature control lever is moved to FULL COLD position.
^ The VENT switch is pushed to turn ON.
^ The fan control switch is turned to 4-speed.

AIR CONDITIONING SWITCH
Start the engine, set the fan control switch to the desired (1 to 4) position and push the air conditioning switch to turn ON the air conditioning. The indicator lamp will come on when the air conditioning is ON.

To stop the air conditioning, push the switch again to return it to the original position.

The air conditioning cooling function operates only when the engine is running.