Generic Scan Tool (GST)

DESCRIPTION



Generic Scan Tool (OBDII scan tool) complying with SAE J1978 has five different functions. IS09141 is used as the protocol.




FUNCTION

GST INSPECTION PROCEDURE
1. Turn off ignition switch.




2. Connect "GST" to data link connector for GST (Data link connector for GST is located under LH dash panel near the fuse box coven)
3. Turn ON ignition switch.




4. Enter the program according to instruction on the screen or in the operation manual.
(*: Regarding GST screens in this section, sample screens are shown.)




5. Perform each diagnostic mode according to each service procedure.

For further information, see the GST Operation Manual of the tool maker.