Front Heated Oxygen Sensor

DESCRIPTION
The front O2S* is placed into the exhaust manifold. It detects the amount of oxygen in the exhaust gas compared to the outside air. The sensor has a closed-end tube made of ceramic zirconia. The zirconia generates voltage from approximately 1V in richer conditions to 0V in leaner conditions. The sensor signal is sent to the ECM. The ECM adjusts the injection pulse duration to achieve the ideal air-fuel ratio. The ideal air-fuel ratio occurs near the radical change from 1V to 0V.
A heater is used to activate the sensor on M/T models for California and A/T models.
*: Oxygen sensor (M/T models except for California)
Heated oxygen sensor (M/T models for California and A/T models)