Reverse Clutch

DIMENSIONS
Clutch and Brake Return Springs:
Free Length 18.6 mm (0.732 inch)
Outer Diameter 8.0 mm (0.315 inch)
Dish Plate Thickness 2.8 mm (0.110 inch)
End Play 0.65 - 1.00 mm (0.0256 - 0.0394 inch)
Retaining Plate And Snap Ring Clearance:
Standard 0.5 - 0.8 mm (0.020 - 0.031 inch)
Allowable Limit 1.2 mm (0.047 inch)
Thickness Of Drive Plate:
Standard Value 2.0 mm (0.079 inch)
Wear Limit 1.8 mm (0.071 inch)
Thickness Of Retaining Plates Part No. And Thickness:
31537-31x00 4.4 mm (0.173 inch)
31537-31x01 4.6 mm (0.181 inch)
31537-31x02 4.8 mm (0.189 inch)
31537-31x03 5.0 mm (0.197 inch)
31537-31x04 5.2 mm (0.205 inch)

GENERAL
No. Of Drive Plates 2
No. Of Driven Plates 2