Fuel Pump: Service and Repair

REMOVAL AND INSTALLATION
1. Release fuel pressure from fuel line.
2. Remove the inspection hole cover located behind the rear seat.
3. Disconnect harness connectors and fuel tubes from upper plate of fuel gauge. Put mating marks on tubes for correct installation.





4. Remove the fuel gauge retainer and fuel gauge.





5. While lifting the upper plate, disconnect the fuel tube and harness connector.





6. Remove fuel pump by pulling the top end of the fuel pump bracket upward.





7. Remove fuel gauge unit by pulling the fuel gauge unit horizontally to the left and then remove harness connector.

NOTE: Carefully place the removed connector in the fuel tank so that it can be pulled out for the installation.





8. Install fuel gauge as shown.

NOTE: When installing upper plate, align the mark on it with the center of marks on fuel tank.

9. Reverse procedure to install.