Low and Reverse Brake
SERVICE SPECIFICATIONSDrive Plate Thickness:
Standard Value 1.6 mm (0.063 inch)
Wear Limit 1.4 mm (0.055 inch)
No. Of Drive Plates 6
No. Of Driven Plates 6
No. Of Returning Revolutions:
Anchor Bolt 2.5
Retaining Plate And Snap Ring Clearance:
Standard 0.8 - 1.1 mm (0.031 - 0.043 inch)
Wear Limit 2.3 mm (0.091 inch)
Seal Ring-To-Groove Clearance:
Standard Value 0.10 - 0.25 mm (0.0039 - 0.0098 inch)
Wear Limit 0.25 mm (0.0098 inch)
Thickness Of Retaining Plate And Part No.:
7.0 mm (0.276 inch) 31667-41X12
7.2 mm (0.283 inch) 31667-41X13
7.4 mm (0.291 inch) 31667-41X14
7.6 mm (0.299 inch) 31667-41X07
7.8 mm (0.307 inch) 31667-41X08
8.0 mm (0.315 inch) 31667-41X00
8.2 mm (0.323 inch) 31667-41X01
8.4 mm (0.331 inch) 31667-41X02
8.6 mm (0.339 inch) 31667-41X03
8.8 mm (0.346 inch) 31667-41X04
9.0 mm (0.354 inch) 31667-41X05
9.2 mm (0.362 inch) 31667-41X06