Reverse Clutch

DIMENSIONS
Clutch Drum End Play 0.55 - 0.90 mm (0.0217 - 0.0354 inch)
Drive Plate Thickness:
Standard 2.0 mm (0.079 inch)
Wear Limit 1.8 mm (0.071 inch)
Retaining Plate/Snap Ring Clearance:
Standard 0.5 - 0.8 mm (0.020 - 0.031 inch)
Wear Limit 1.2 mm (0.047 inch)
Tickness Of Drive Plates:
Standard 2.0 mm (0.079 inch)
Wear Limit 1.8 mm (0.071 inch)

GENERAL
No. Of Drive Plates 2
No. Of Driven Plates 2

SERVICE SPECIFICATIONS
Retaining Plate Part No. Thickness:
31537-42X02 4.8 mm (0.189 inch)
31537-42X03 5.0 mm (0.197 inch)
31537-42X04 5.2 mm (0.205 inch)
31537-42X05 5.4 mm (0.213 inch)
31537-42X06 5.6 mm (0.220 inch)