Pressure Plate

TIGHTENING SPECIFICATIONS
Clutch Cover:
First step 10 - 20 Nm (7 - 14 ft. lbs.)
Final step 22 - 29 Nm (16 - 22 ft. lbs.)

DIMENSIONS
Clutch Cove Uneven Limit 0.7 mm (0.028 inch)
Clutch Cove Set Load 5394 N (1213 lbs.)
Facing:
Assy. Thickness [4] 7.6 - 8.0 mm (0.299 - 0.315 inch)
Size:
Inner Diameter 150 mm (5.91 inch)
Outer Diameter 225 mm (8.86 inch)
Thickness 3.5 mm (0.138 inch)
Wear [1] 0.3 mm (0.012 inch)
Maximum Backlash Of Spline [2] 0.9 mm (0.035 inch)
Runout Limit 1.0 mm (0.039 inch)
Runout Distance [3] 107.5 mm (4.23 inch)

[1]: Wear limit of facing surface to rivet head.
[2]: Backlash of spline and runout of facing (at outer edge of disc).
[3]: Check point (from hub center).
[4]: With a load of 550 kg. (1213 lbs.).