Mainshaft, M/T

AVAILABLE SNAP RINGS
Mainshaft Front:
Part Number And Thickness:
32263-V5200 2.4 mm (0.094 inch)
32263-V5201 2.5 mm (0.098 inch)
Overdrive Mainshaft Bearing:
Part Number And Thickness:
32228-20100 1.1 mm (0.043 inch)
32228-20101 1.2 mm (0.047 inch)
32228-20102 1.3 mm (0.051 inch)
32228-20103 1.4 mm (0.055 inch)

GENERAL
Number Of Teeth:
Drive 22
1st 33
2nd 27
3rd 26
OD 21
Reverse 36

SERVICE SPECIFICATIONS
Mainshaft Front:
Allowable Clearance 0 - 0.18 mm (0 - 0.0071 inch)
OD Mainshaft Bearing:
Allowable Clearance 0 - 0.14 mm (0 - 0.0055 inch)

TIGHTENING SPECIFICATIONS
Lock Nut 137 - 167 Nm (101 - 123 ft. lbs.)