Models Without Theft Warning System

Power is supplied at all times
^ to ignition switch terminal (1)
^ through 30 A fusible link (letter (g) , located in the fuse and fusible link box).

With the ignition switch in the START position, power is supplied
^ from ignition switch terminal (5)
^ to inhibitor switch terminal (2)
^ through inhibitor switch terminal (1), with the selector lever in the P or N position
^ to terminal (2) of the starter motor windings.
The starter motor plunger closes and provides a closed circuit between the battery and starter motor. The starter motor is grounded to the engine block. With power and ground supplied, cranking occurs and the engine starts.