Output Shaft, A/T

DIMENSIONS
Bearing Retainer Seal Ring Clearance:
Standard 0.10 - 0.30 mm (0.0039 - 0.0118 inch)
Allowable Limit 0.30 mm (0.0118 inch)
Output Shaft End Play 0 - 0.15 mm (0 - 0.0059 inch)
Output Shaft Adjusting Shims Part Number And Thickness:
31438-80X60 0.80 mm (0.0315 inch)
31438-80X61 0.84 mm (0.0331 inch)
31438-80X62 0.88 mm (0.0346 inch)
31438-80X63 0.92 mm (0.0362 inch)
31438-80X64 0.96 mm (0.0378 inch)
31438-80X65 1.00 mm (0.0394 inch)
31438-80X66 1.04 mm (0.0409 inch)
31438-80X67 1.08 mm (0.0425 inch)
31438-80X68 1.12 mm (0.0441 inch)
31438-80X69 1.16 mm (0.0457 inch)
31438-80X70 1.20 mm (0.0472 inch)
Seal Ring Clearance:
Standard 0.10 - 0.25 mm (0.0039 - 0.0098 inch)
Allowable limit 0.25 mm (0.0098 inch)