Outline

Outline:

The following harness layouts use a map style grid to help locate connectors on the drawings:
^ Engine Room Harness (Engine Compartment)
^ Main Harness
^ Body Harness

The grid reference is placed on the page where connectors are listed in number order.
To the left of the connector number code there is a grid reference.

Example:
G2 (E1): Automatic Speed Control Device (ASCD) actuator
grid reference

To use the grid reference
1. Find the desired connector number on the connector list.
2. Find the grid reference.
3. On the drawing, find the crossing of the grid reference letter column and number row.
4. Find the connector number in the crossing zone.
5. Follow the line (if used) to the connector.
The approximate on-vehicle location of the connector has been found.