A/T Models

Power is supplied at all times:
^ to ignition switch terminal (1)
^ through 30 A fusible link (letter (b) located in the fusible link and fuse box).

USA models with theft warning system
With the ignition switch in the ON or START position, power is supplied:
^ through 10 A fuse (No. (26) located in the fuse block)
^ to theft warning relay-1 terminal (1).
With the ignition switch in the START position, power is supplied:
^ from ignition switch terminal (5)
^ to theft warning relay-1 terminal (3)
^ through theft warning relay-1 terminal (4)
^ to inhibitor switch terminal (2)
^ through inhibitor switch terminal (1), with the selector lever in the P or N position
^ to terminal (1) of the starter motor windings.
If the theft warning system is triggered, terminal 1 of the theft warning relay-1 is grounded and power to the inhibitor switch is interrupted.

Except USA models with theft warning system
With the ignition switch in the START position, power is supplied:
^ from ignition switch terminal (5)
^ to inhibitor switch terminal (2)
^ through inhibitor switch terminal (1), with the selector lever in the P or N position