Overhaul

DISASSEMBLY
Refer to the illustration when servicing noting the following:
1. When disassembling and assembling, unlock steering lock with key.
2. Remove combination switch.
3. Ensure that rounded surface of snap ring faces toward bearing when snap ring is installed.





4. Install snap ring on upper shaft with a suitable tool.





5. Break self-shear type screws with a drill or other appropriate tool and remove steering lock.

INSPECTION
1. When steering wheel does not turn smoothly, check the steering column as follows and replace damaged parts.
a. Check column bearings for damage or unevenness. Lubricate with recommended multi-purpose grease or replace steering column as an assembly, if necessary.
b. Check jacket tube for deformation or breakage.





c. When the vehicle is involved in a light collision, check column length "L". If it is not within specifications, replace steering column as an assembly. Column length "L": 526.2 - 527.8 mm (20.72 - 20.78 inch).

ASSEMBLY
Reverse the disassembly procedure to assemble, noting the following:





1. Install self-shear type screws and then cut off self-shear type screw heads.





2. After installing steering column, check tilt mechanism operation.