With CONSULT

HOW TO ERASE DTC (With CONSULT)
1. If the ignition switch stays ON after repair work, be sure to turn ignition switch OFF once. Wait for at least 5 seconds and then turn it ON (engine stopped) again.
2. Turn CONSULT ON, and touch A/T.
3. Touch SELF-DIAG RESULTS.
4. Touch ERASE. (The DTC in the A/T control unit will be erased.) Then touch BACK twice.
5. Touch ENGINE.
6. Touch SELF-DIAG RESULTS.
7. Touch ERASE. (The DTC in the ECM will be erased.)