High Clutch

DIMENSIONS
Clutch and Brake Return Springs:
Free Length 22.5 mm (0.886 inch)
Outer Diameter 10.8 mm (0.425 inch)
Retaining Plate And Snap Ring Clearance:
Standard 1.8 - 2.2 mm (0.071 - 0.087 inch)
Allowable Limit 3.0 mm (0.118 inch)
Seal Ring And Ring Groove Clearance:
Standard Clearance 0.08 - 0.23 mm (0.0031 - 0.0091 inch)
Allowable Limit 0.23 mm (0.0091 inch)
Thickness of Drive Plate:
Standard Value 1.6 mm (0.063 inch)
Wear Limit 1.4 mm (0.055 inch)
Thickness Of Retaining Plates Part No. And Thickness:
31537-80x11 3.2 mm (0.126 inch)
31537-80x12 3.4 mm (0.134 inch)
31537-80x13 3.6 mm (0.142 inch)
31537-80x14 3.8 mm (0.150 inch)
31537-80x15 4.0 mm (0.157 inch)

GENERAL
No. Of Drive Plates 3
No. Of Driven Plates 7 + 1