Washer Operation

With the ignition switch in the ACC or ON position, power is supplied
^ through 20 A fuse (No. (11) located in the fuse block)
^ to washer motor terminal (2).
When the lever is pulled to the WASH position, ground is supplied
^ to washer motor terminal (1), and
^ to time control unit terminal (2)
^ from terminal (18) of the wiper switch
^ through terminal (17) of the wiper switch, and
^ through body grounds (E12) and (E37).
With power and ground supplied, the washer motor operates.
The wiper motor operates twice at low speed for approximately 3 seconds to clean the windshield. This feature is controlled by the time control unit in the same manner as the intermittent operation.