Steering: Service Precautions

^ Before disassembly, thoroughly clean the outside of the unit.
^ Disassembly should be done in a clean work area. It is important to prevent the internal parts from becoming contaminated by dirt or other foreign matter.
^ For easier and proper assembly, place disassembled parts in order on a parts rack.
^ Use nylon cloths or paper towels to clean the parts; common shop rags can leave lint that might interfere with their operation.
^ Before inspection or reassembly, carefully clean all parts with a general purpose, non-flammable solvent.
^ Before assembly, apply a coat of Automatic Transmission Fluid (ATF) type Dexron (tm) IIE, Dexron (tm) III or equivalent. to hydraulic parts. Petroleum jelly may be applied to O-rings and seals. Do not use any grease.
^ Replace all gaskets, seals and O-rings. Avoid damaging O-rings, seals and gaskets during installation. Perform functional tests whenever designated.