Reverse Clutch

DIMENSIONS
Dish Plate Thickness 3.08 mm (0.1213 inch)
End Play 0.55 - 0.90 mm (0.0217 - 0.0354 inch)
Retaining Plate And Snap Ring Clearance:
Standard 0.5 - 0.8 mm (0.020 - 0.031 inch)
Allowable Limit 1.2 mm (0.047 inch)
Thickness Of Drive Plate:
Standard Value 1.6 mm (0.063 inch)
Wear Limit 1.4 mm (0.055 inch)
Thickness Of Retaining Plates Part No. And Thickness:
31537-80x05 6.6 mm (0.260 inch)
31537-80x06 6.8 mm (0.268 inch)
31537-80x07 7.0 mm (0.276 inch)
31537-80x08 7.2 mm (0.283 inch)
31537-80x09 7.4 mm (0.291 inch)
31537-80x20 7.6 mm (0.299 inch)
31537-80x21 7.8 mm (0.307 inch)

GENERAL
No. Of Drive Plates 2
No. Of Driven Plates 2