Service Specifications

SPECIFICATIONS
Cylinder Bore Inner Diameter
Grade No. 1 93.000 - 93.010 mm (3.6614 - 3.6618 inch)
Grade No. 2 93.011 - 93.020 mm (3.6618 - 3.6622 inch)
Grade No. 3 93.021 - 93.030 mm (3.6622 - 3.6626 inch)
Main Journal Inner Diameter
Grade No. 0 63.993 - 63.999 mm (2.5194 - 2.5196 inch)
Grade No. 1 64.000 - 64.005 mm (2.5197 - 2.5199 inch)
Grade No. 2 64.006 - 64.011 mm (2.5199 - 2.5201 inch)
Grade No. 3 64.012 - 64.017 mm (2.5202 - 2.5203 inch)
Difference Between Cylinders Less Than 0.03 mm (0.0012 inch)
Wear Limit 0.20 mm (0.0079 inch)
Out-Of-Round Less Than 0.015 mm (0.0006 inch)
Surface Flatness
Standard Less Than 0.03 mm (0.0012 inch)
Limit 0.10 mm (0.0039 inch)
Taper Less Than 0.015 mm (0.0006 inch)