Fog/Driving Lamp: Adjustments

Before performing aiming adjustment, make sure of the following.
a. Keep all tires inflated to correct pressure.
b. Place vehicle on lever ground.
c. Check that vehicle is unloaded (except for full levels of coolant, engine oil and fuel, and spare tire, jack, and tools). Have the driver or equivalent weight placed in driver's seat.
Loosen the front fog lamp bolts and adjust the vertical aiming by moving the front fog lamp assembly.




1. Set the distance between the screen and the center of the fog lamp lens as shown at left.
2. Turn front fog lamps ON.




3. Adjust front tog lamps so that the top edge of the high intensity zone is 100 mm (4 in) below the height of the fog lamp centers as shown at left.
^ When performing adjustment, if necessary, cover the head- lamps and opposite fog lamp.
4. Tighten the front fog lamp bolts.