Mode 6 Data

TEST VALUE AND TEST LIMIT (GST ONLY-NOT CONSULT APPLICABLE)
Shown in the table is the information specified in Mode 6 of SAE J1979.
The test value is a parameter used to determine whether a system/circuit diagnostic test is "OK" or "NG" while being monitored by the ECM during self-diagnosis. The test limit is a reference value which is specified as the maximum or minimum value and is compared with the test value being monitored.
Items for which this data (test value and test limit) is displayed is the same as SRT code items (9 test items).
This data (test value and test limit) is specified by Test ID (TID) and Component ID (CID). This data can be displayed on the GST screen.







EMISSION-RELATED DIAGNOSTIC INFORMATION ITEMS