Interior - Seat Belt Latch Plate Button Missing: Overview

Classification:
RS99-001C

Reference;
NTB99-022C

Date:
August 5, 2003

FRONT SEAT BELT LATCH PLATE RETAINING BUTTON MISSING

The Applied Vehicles and Service Information sections of this bulletin have been revised. Please discard all previous copies of NTB99-022.





APPLIED VEHICLES

IF YOU CONFIRM:

^ The front seat belt latch plate of an applied vehicle slides to the end of the seat belt, sliding down the belt to the floor at the base of the B pillar.

^ This happens because the seat belt latch plate retaining button is lost or damaged.

^ The seat belt and retractor are in serviceable condition,

ACTION:

Use this bulletin to replace the retaining button and clean, and refurbish the driver's and passenger's front seat belt "D" rings.

NOTE:
This button is required to hold the seat belt latch plate at the shoulder location, preventing it from sliding to the floor when the belt is released.

NOTE:
The purpose of "ACTION" is to give you a quick idea of the work you will be performing. You must closely follow the entire Service Procedure as it contains information that is essential to successfully completing this repair.





PARTS INFORMATION





CLAIMS INFORMATION

NOTE:
This is the ONLY approved repair procedure for this incident. Claims to Nissan for the repair of this incident may be denied if the repairs are not performed exactly as outlined in this bulletin.