Vehicle Damage Warnings

WARNING:
- Do not smoke while servicing fuel system. Keep open flames and sparks away from work area.
- Be sure to furnish workshop with a CO2 fire extinguisher.

CAUTION:
- Before removing fuel line parts carry out the following procedures:
b. Release fuel pressure from fuel line.
c. Disconnect battery ground cable.
- When installing fuel check valve, be careful of its designated direction.
- Always replace O-ring and clamps with new ones.
- Do not kink or twist tubes when they are being installed.
- Do not tighten hose clamps excessively to avoid damaging hoses.
- After installing tubes, run engine and check for fuel leaks at connections.
- Use only a genuine fuel filler cap as a replacement.